TPS22915BYFPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Resistance | 37mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22915 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 7.7μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.05V~5.5V |
| Rds On (Typ) | 37m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 0m |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22915BYFPT Overview
A Tape & Reel (TR) is used to package it.There is a 4-XFBGA, DSBGA package that includes it.Surface Mount is the mounting type of the LED driver.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver is equipped with 1 outputs.With a supply voltage of Not Required, the LED driving board operates.Voltage output is N-Channel volts at maximum.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.The TPS22915 family consists of this type.A total of 4 terminations have been found in it.In order to operate, 4 pins are used.Currently, there are 1 functions associated with the lighting driver.The maximum output current must drop to 2A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 1.2V.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 37mOhm resistance.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.
TPS22915BYFPT Features
Supplied from 1.2V
Resistance of 37mOhm
TPS22915BYFPT Applications
There are a lot of Texas Instruments TPS22915BYFPT Power Switches ICs applications.
- USB Power Distribution
- Low Voltage I/O System Power
- USB Power Distribution
- Hot Swap
- Wireless Headsets
- Smartphone and PDA
- PC Card Hot Swap
- Hot Swap
- Wireless/Networking Cards
- Portable Video Game Players
