TPS22916BYFPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22916 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Min (Vsup) | 1V |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 1V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0V~5.5V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 200m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 0m |
| RoHS Status | ROHS3 Compliant |
TPS22916BYFPT Overview
It is package in Tape & Reel (TR) case.It is included in the package 4-XFBGA, DSBGA.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver is equipped with 1 outputs.A voltage of 1V~5.5V is used to power it.A maximum voltage of P-Channel volts is available from the output of this LED driver.Slew Rate Controlled features are available on the lighting driver.It belongs to the TPS22916 family.It consists of 4 terminations in total.It is necessary to use the 4 pins in order to operate the LED driver.It has 1 functions.In terms of output, the lighting driver can provide a maximum of 2A V.Using a voltage of 1.2V allows for high efficiency.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 1V.It has a BUFFER OR INVERTER BASED PERIPHERAL DRIVER type of interface with the lighting driver.
TPS22916BYFPT Features
Supplied from 1.2V
TPS22916BYFPT Applications
There are a lot of Texas Instruments TPS22916BYFPT Power Switches ICs applications.
- Portable GPS Device
- Storage Drives
- Wireless Headsets
- Smart Phones, Feature Phones
- Handheld Devices
- Portable Music Players
- Set-top-box
- Hard Disk Drives
- USB Power Distribution
- USB3.1 Power Delivery
