TPS22916CLYFPT
| Parameters | |
|---|---|
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 1V~5.5V |
| Input Type | Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0V~5.5V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 200m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 0m |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22916 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Supply Voltage-Min (Vsup) | 1V |
TPS22916CLYFPT Overview
Tape & Reel (TR) is the way it's packaged.It is included in the package 4-XFBGA, DSBGA.This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.The LED driver has 1 outputs.Operation is based on a supply voltage of 1V~5.5V.It produces a maximum output voltage of P-Channel volts at its maximum output.In terms of features, the LED driving board has Slew Rate Controlled.As you can see, it comes from the TPS22916 family.It contains 4 terminations.It is necessary to use the 4 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.In terms of output, the lighting driver can provide a maximum of 2A V.High efficiency is possible at 1.2V supply voltage.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 1V.LED driver interface type is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.
TPS22916CLYFPT Features
Supplied from 1.2V
TPS22916CLYFPT Applications
There are a lot of Texas Instruments TPS22916CLYFPT Power Switches ICs applications.
- Hard Disk Drives
- USB Protection
- Portable Music Players
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- Portable GPS
- Storage Drives
- Hot-Swap Systems
- PDAs
- Low Voltage I/O System Power
