banner_page

TPS22916CNYFPT

P-Channel PMIC TPS22916 4 Pin 1.2V 4-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22916CNYFPT
  • Package: 4-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 830
  • Description: P-Channel PMIC TPS22916 4 Pin 1.2V 4-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 4-XFBGA, DSBGA
Surface Mount YES
Number of Pins 4
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.2V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number TPS22916
Number of Outputs 1
Output Type P-Channel
Supply Voltage-Min (Vsup) 1V
Current - Output (Max) 2A
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) 1V~5.5V
Input Type Non-Inverting
Switch Type General Purpose
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 0V~5.5V
Interface IC Type BUFFER OR INVERTER BASED PERIPHERAL DRIVER
Fault Protection Reverse Current
Rds On (Typ) 200m Ω
Built-in Protections TRANSIENT
Output Current Flow Direction SOURCE
Height 500μm
Length 0m
Width 0m
Thickness 0m
RoHS Status ROHS3 Compliant

TPS22916CNYFPT Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).The 4-XFBGA, DSBGA package contains it.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.In order to operate, it requires a voltage supply of 1V~5.5V.A maximum output voltage of P-Channel volts can be obtained with this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled.The TPS22916 family contains this object.It contains 4 terminations.The operation is carried out using the 4 pins.The LED driver has 1 functions.The LED driver output is limited to 2AV.With a supply voltage of 1.2V, high efficiency is possible.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 1V.BUFFER OR INVERTER BASED PERIPHERAL DRIVER is the type of interface to the LED driver.

TPS22916CNYFPT Features


Supplied from 1.2V

TPS22916CNYFPT Applications


There are a lot of Texas Instruments TPS22916CNYFPT Power Switches ICs applications.

  • Low Voltage I/O System Power
  • USB Power Distribution
  • Solid-State Drives
  • Portable/Handheld Devices
  • Wireless/Networking Cards
  • Hot-Swap Systems
  • Various applications equipped with buttons
  • Portable GPS
  • Portable Video Game Players
  • Portable Devices

Write a review

Note: HTML is not translated!
    Bad           Good