TPS22917DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS22917 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 1V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0V~5.5V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
TPS22917DBVT Description
The TPS22917D device is a small, single channel load switch using a low leakage P-Channel MOSFET for minimum power loss. Advanced gate control design supports operating voltages as low as 1 V with minimal increase in ON-Resistance and power loss.
The switch ON state is controlled by a digital input that can interface directly with low-voltage control signals. The TPS22917 uses active high enable logic, while the TPS22917L uses active low. When power is first applied, a Smart Pulldown is used to keep the ON pin from floating until system sequencing is complete. After the ON pin is deliberately driven high (≥VIH), the Smart Pulldown (RPD) is disconnected to prevent unnecessary power loss. The TPS22917D device is available in a leaded SOT-23 package (DBV) which allows visual inspection of solder joints. The device is characterized for operation over a temperature range of ﹣40 ℃ to 125 ℃.
TPS22917DBVT Features
Input operating voltage range (VIN): 1 V to 5.5 V
Maximum continuous current (IMAX): 2 A
5 VIN = 80 m? (typical)
1.8 VIN = 120 m? (typical)
1 VIN = 220 m? (typical)
ON state (IQ): 0.5 μA (typical)
OFF state (ISD): 10 nA (typical)
ON ≥ VIH (ION): 10 nA (maximum)
ON ≤ VIL (RPD): 750 kΩ (typical)
TPS22917DBVT Applications
Industrial systems
Set top box
Blood glucose meters
Electronic point of sale
5G Communication
Electrification of automobile
Industrial 4.0
The TPS22917D device is a small, single channel load switch using a low leakage P-Channel MOSFET for minimum power loss. Advanced gate control design supports operating voltages as low as 1 V with minimal increase in ON-Resistance and power loss.
The switch ON state is controlled by a digital input that can interface directly with low-voltage control signals. The TPS22917 uses active high enable logic, while the TPS22917L uses active low. When power is first applied, a Smart Pulldown is used to keep the ON pin from floating until system sequencing is complete. After the ON pin is deliberately driven high (≥VIH), the Smart Pulldown (RPD) is disconnected to prevent unnecessary power loss. The TPS22917D device is available in a leaded SOT-23 package (DBV) which allows visual inspection of solder joints. The device is characterized for operation over a temperature range of ﹣40 ℃ to 125 ℃.
TPS22917DBVT Features
Input operating voltage range (VIN): 1 V to 5.5 V
Maximum continuous current (IMAX): 2 A
5 VIN = 80 m? (typical)
1.8 VIN = 120 m? (typical)
1 VIN = 220 m? (typical)
ON state (IQ): 0.5 μA (typical)
OFF state (ISD): 10 nA (typical)
ON ≥ VIH (ION): 10 nA (maximum)
ON ≤ VIL (RPD): 750 kΩ (typical)
TPS22917DBVT Applications
Industrial systems
Set top box
Blood glucose meters
Electronic point of sale
5G Communication
Electrification of automobile
Industrial 4.0
