TPS22918TDBVTQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| Resistance | 52mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22918 |
| Output Type | N-Channel |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.95 ms |
| Switch Type | General Purpose |
| Rise Time | 2.54ms |
| Fall Time (Typ) | 2 μs |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 2 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1V~5.5V |
| Number of Drivers | 1 |
| Rds On (Typ) | 52m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT |
| Ambient Temperature Range High | 105°C |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22918TDBVTQ1 Overview
The package is in the form of a Tape & Reel (TR).Package SOT-23-6 contains it.A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~105°C TA.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.It comes under the family of TPS22918.In total, there are 6 terminations.The operation is carried out using the 6 pins.The LED driving board has a total of 1 functions.In terms of output, the lighting driver can provide a maximum of 2A V.There is 52mOhm resistance on the LED driver.This electrical component can be found in the Automotive, AEC-Q100 series.As a result, the output current is set to 2A.The part has 1 drivers.
TPS22918TDBVTQ1 Features
Resistance of 52mOhm
TPS22918TDBVTQ1 Applications
There are a lot of Texas Instruments TPS22918TDBVTQ1 Power Switches ICs applications.
- Portable Music Players
- Set-Top Boxes
- USB3.1 Power Delivery
- Portable/Handheld Devices
- Mobile Communication Devices
- Notebook PC
- Low Voltage I/O System Power
- Handheld Devices
- HDD and SSD
- Solid-State Drives
