TPS22919DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS22919 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.6V~5.5V |
| Fault Protection | Short Circuit |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 89m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
The TPS22919 device is a small, single-channel load switch with a controllable conversion rate. The device contains an N-channel MOSFET that operates in the input voltage range from 1.6V to 5.5V and supports a maximum continuous current of 1.5A. When powered on for the first time, the smart drop-down function is used to prevent the ON pin from floating until the system sequencing is complete. Once the pin is deliberately pulled up (> VIH), the smart pull-down will be disconnected to prevent unnecessary power loss. The TPS22919 load switch is also self-protective, which means it will protect itself from device output short-circuit events. It also has a thermal shutdown function to prevent any damage caused by overheating. The TPS22919 is in a standard SC-70 package and is characterized by its ability to operate in the node temperature range from-40 °C to 125 °C.
