TPS22920LYZPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 0.9V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22920 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 4A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.75V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Configuration | High Side |
| Output Current | 4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 68μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.75V~3.6V |
| Rds On (Typ) | 5.3m Ω |
| Height | 500μm |
| Length | 1.25mm |
| Width | 2.25mm |
| Thickness | 310μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22920LYZPR Overview
A Tape & Reel (TR) is used to package it.It is included in the package 8-XFBGA, DSBGA.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Load Discharge, Slew Rate Controlled features in order for it to be useful.This object belongs to the TPS22920 family.A total of 8 terminations have been found in it.The 8 pins are used to operate the LED driver.It has 1 functions.This results in the maximum output current dropping to 4A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 0.9V.This lighting driver is mounted in the way of Surface Mount.The output current is set to 4A in this case.The LED driver is configured with a maximum supply voltage of 3.6V (Vsup).Normal operation requires a voltage above 0.75V for the supply voltage.In this case, the analog IC is ANALOG CIRCUIT.To choose from, there are 1 channels.
TPS22920LYZPR Features
Supplied from 0.9V
1 channels
TPS22920LYZPR Applications
There are a lot of Texas Instruments TPS22920LYZPR Power Switches ICs applications.
- Notebook and Tablet Computers
- Hard Disk Drives
- Portable GPS
- HDD and SSD
- Portable Devices
- HDD, SSD
- USB Ports/Hubs
- Storage Drives
- Set-top-box
- Wireless/Networking Cards
