TPS22920LYZPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 0.9V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22920 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 0.75V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Current - Output (Max) | 4A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 68μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.75V~3.6V |
| Rds On (Typ) | 5.3m Ω |
| Height | 500μm |
| Length | 1.25mm |
| Width | 2.25mm |
| Thickness | 310μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22920LYZPT Overview
The LED driver's packaged as a Tape & Reel (TR).There is a 8-XFBGA, DSBGA package that includes it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.This object belongs to the TPS22920 family.A total of 8 terminations have been recorded.In order to operate, 8 pins are used.It is important to note that the LED driving board has 1 functions.4AV is the maximum output of the LED driver.High efficiency is possible when the supply voltage is set to 0.9V.Surface Mount is mounted in the way.The lighting driver is configured to have a maximum supply voltage of 3.6V (Vsup).Normal operation requires a voltage above 0.75V for the supply voltage.In this LED driving board, the analog IC ANALOG CIRCUIT is employed.In total, 1 channels are available.
TPS22920LYZPT Features
Supplied from 0.9V
1 channels
TPS22920LYZPT Applications
There are a lot of Texas Instruments TPS22920LYZPT Power Switches ICs applications.
- Gaming
- Set-Top Boxes
- Portable GPS Device
- Mobile Communication Devices
- USB Protection
- USB Ports/Hubs
- Various applications equipped with buttons
- Hot Swap
- Wireless/Networking Cards
- Portable Video Game Players
