banner_page

TPS22920YZPT

N-Channel 0.5mm PMIC TPS22920 8 Pin 1.05V 8-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22920YZPT
  • Package: 8-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 704
  • Description: N-Channel 0.5mm PMIC TPS22920 8 Pin 1.05V 8-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 23 hours ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-XFBGA, DSBGA
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Resistance 7.3mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.05V
Terminal Pitch 0.5mm
Base Part Number TPS22920
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Max Output Current 4A
Operating Supply Voltage 3.6V
Supply Voltage-Min (Vsup) 0.75V
Number of Channels 1
Interface On/Off
Analog IC - Other Type ANALOG CIRCUIT
Output Configuration High Side
Output Current 4A
Voltage - Supply (Vcc/Vdd) Not Required
Quiescent Current 68μA
Input Type Non-Inverting
Turn On Delay Time 970 μs
Switch Type General Purpose
Min Input Voltage 750mV
Max Input Voltage 3.6V
Turn-Off Delay Time 3 μs
Ratio - Input:Output 1:1
Voltage - Load 0.75V~3.6V
Rds On (Typ) 5.3m Ω
Height 500μm
Length 1.25mm
Width 2.25mm
Thickness 310μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22920YZPT Overview


It is packaged in the manner of a Tape & Reel (TR).This package is included in 8-XFBGA, DSBGA.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.It is a member of the TPS22920 family.A total of 8 terminations have been recorded.In order to operate, 8 pins are used.As far as functions are concerned, the lighting driver has 1.This operation requires the maximum output current to be decreased to 4A.The supply voltage can be 1.05V for high efficiency.This lighting driver is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.Lighting drivers with 7.3mOhm resistance are used.The output current is set to 4A in this case.The supply voltage (Vsup) should be kept above 0.75V for normal operation.The gadget uses an analog IC, which is ANALOG CIRCUIT in this case.You can select from 1 channels.In order to maximize efficiency, the supply voltage should be set at 3.6V.The maximum input voltage of the LED driver is 3.6V volts.It requires 750mV volts as the minimum input voltage.

TPS22920YZPT Features


Supplied from 1.05V
Resistance of 7.3mOhm
1 channels

TPS22920YZPT Applications


There are a lot of Texas Instruments TPS22920YZPT Power Switches ICs applications.

  • Solid State Drivers
  • USB Ports/Hubs
  • Hot Swap
  • Portable GPS Device
  • Wireless/Networking Cards
  • PC Cards
  • Handheld Devices
  • USB3.1 Power Delivery
  • USB Power Distribution
  • Portable Devices

Write a review

Note: HTML is not translated!
    Bad           Good