banner_page

TPS22921YFPR

P-Channel 0.4mm PMIC TPS22921 6 Pin 1V 6-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22921YFPR
  • Package: 6-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 141
  • Description: P-Channel 0.4mm PMIC TPS22921 6 Pin 1V 6-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 6-XFBGA, DSBGA
Surface Mount YES
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 170mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Max Power Dissipation 645mW
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1V
Terminal Pitch 0.4mm
Base Part Number TPS22921
Pin Count 6
Number of Outputs 1
Output Type P-Channel
Max Output Current 2A
Operating Supply Voltage 3.6V
Supply Voltage-Min (Vsup) 0.9V
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Nominal Supply Current 120nA
Output Configuration High Side
Power Dissipation 645mW
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 800nA
Adjustable Threshold NO
Quiescent Current 200nA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 750mV
Max Input Voltage 3.6V
Ratio - Input:Output 1:1
Voltage - Load 0.9V~3.6V
Rds On (Typ) 14m Ω
Height 500μm
Length 1mm
Width 1.4mm
Thickness 500μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22921YFPR Overview


It is packaged in the form of a Tape & Reel (TR).The 6-XFBGA, DSBGA package includes it.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.Voltage output is P-Channel volts at maximum.In terms of features, the LED driving board has Slew Rate Controlled.It is part of the TPS22921 family of LED drivers.A total of 6 terminations have been found in it.The 6 pins are used to operate the LED driver.Currently, the lighting driver has a total of 1 functions.The maximum output current is reduced to 2A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 1V.There are 6 pins in total on this board.There is 170mOhm resistance on the LED driver.In this case, the output current is set to 2A.Normal operation requires Vsup above 0.9V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 1 channels.In order to optimize the efficiency of the supply voltage, it should be set to 3.6V.A maximum input voltage of 3.6V volts can be applied to it.As far as input voltage goes, it has a minimum of 750mV volts.A maximum current requirement of 800nA is required for its operation.

TPS22921YFPR Features


Supplied from 1V
Resistance of 170mOhm
1 channels

TPS22921YFPR Applications


There are a lot of Texas Instruments TPS22921YFPR Power Switches ICs applications.

  • Handheld Devices
  • Various applications equipped with buttons
  • Telecom and Network Systems
  • Set-Top Boxes
  • Storage (HDDs, SSDs)
  • Portable GPS
  • Wireless Modem Data Cards
  • HDD and SSD
  • Hot Swap
  • PDAs

Write a review

Note: HTML is not translated!
    Bad           Good