banner_page

TPS22921YZTR

P-Channel 0.5mm PMIC TPS22921 6 Pin 1V 6-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22921YZTR
  • Package: 6-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 784
  • Description: P-Channel 0.5mm PMIC TPS22921 6 Pin 1V 6-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1V
Terminal Pitch 0.5mm
Base Part Number TPS22921
Pin Count 6
Number of Outputs 1
Output Type P-Channel
Operating Supply Voltage 3.6V
Supply Voltage-Min (Vsup) 0.9V
Number of Channels 1
Interface On/Off
Output Configuration High Side
Power Dissipation 645mW
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Quiescent Current 200nA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 750mV
Max Input Voltage 3.6V
Supply Current-Max (Isup) 0.00088mA
Ratio - Input:Output 1:1
Voltage - Load 0.9V~3.6V
Rds On (Typ) 14m Ω
Height 625μm
Length 0m
Width 0m
Thickness 480μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-XFBGA, DSBGA
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Type General Purpose
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Max Power Dissipation 645mW

TPS22921YZTR Overview


The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 6-XFBGA, DSBGA package.The lighting driver has the mounting type Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver is equipped with 1 outputs.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage is P-Channel volts.In terms of features, the LED driving board has Slew Rate Controlled.It is a member of the TPS22921 family.The termination count is 6.In order to operate, the 6 pins are used.As far as the lighting driver is concerned, there are 1 functions.As long as the supply voltage is 1V, high efficiency can be achieved.The lighting driver is mounted in the direction of Surface Mount.There are 6 pins in total on this board.The output current is set to 2A in this case.Normal operation requires a voltage above 0.9V for the supply voltage.We currently have 1 channels available.In order to optimize the efficiency of the supply voltage, it should be set to 3.6V.This LED driver can handle voltages up to 3.6V volts.Input voltage must be at least 750mV volts.The maximum supply current for the LED driver is 0.00088mA when it is operating.This electrical component has a classification of General Purpose.

TPS22921YZTR Features


Supplied from 1V
1 channels

TPS22921YZTR Applications


There are a lot of Texas Instruments TPS22921YZTR Power Switches ICs applications.

  • Hard Disk Drives
  • Smartphone and PDA
  • Storage Drives
  • Wireless/Networking Cards
  • Set-top-box
  • USB Power Distribution
  • Hot Swap
  • Solid-State Drives
  • USB Protection
  • Wearable Devices

Write a review

Note: HTML is not translated!
    Bad           Good