TPS22922BYFPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 170mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 645mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.4mm |
| Base Part Number | TPS22922 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Voltage | 3.6V |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Supply Voltage-Min (Vsup) | 0.9V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 120nA |
| Output Configuration | High Side |
| Power Dissipation | 645mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 200nA |
| Adjustable Threshold | NO |
| Quiescent Current | 200nA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 799 μs |
| Max Output Voltage | 3.6V |
| Switch Type | General Purpose |
| Min Input Voltage | 900mV |
| Max Input Voltage | 3.6V |
| Nominal Input Voltage | 3.6V |
| Turn-Off Delay Time | 807 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.9V~3.6V |
| Rds On (Typ) | 14m Ω |
| Height | 500μm |
| Length | 1mm |
| Width | 1.4mm |
| Thickness | 500μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22922BYFPR Overview
Tape & Reel (TR) is how it's packaged.It is included in the package 6-XFBGA, DSBGA.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.As a default, the output is set to 1.Operation is based on Not Required supply voltage.A maximum voltage of P-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Load Discharge, Slew Rate Controlled features in order for it to be useful.It belongs to the family TPS22922.It consists of 6 terminations in total.During operation, the 6 pins are used.It is important to note that the LED driving board has 1 functions.This operation requires the maximum output current to be decreased to 2A.As long as the supply voltage is 1V, high efficiency can be achieved.The LED driver has a total of 6 pins.Currently, the LED driving board has 170mOhm resistance.This case has the output current set to 2A.Normal operation requires a voltage above 0.9V for the supply voltage.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We offer 1 channels in total.Input voltage is limited to 3.6V volts.A minimum input voltage of 900mV volts is required for this LED driver.It requires 200nA current to operate.
TPS22922BYFPR Features
Supplied from 1V
Resistance of 170mOhm
1 channels
TPS22922BYFPR Applications
There are a lot of Texas Instruments TPS22922BYFPR Power Switches ICs applications.
- Gaming
- HDD and SSD
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- Solid-State Drives
- Portable/Handheld Devices
- Storage Drives
- PDAs
- Wearable Devices
- USB3.1 Power Delivery
