banner_page

TPS22922BYZPR

P-Channel 0.5mm PMIC TPS22922 6 Pin 1V 6-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22922BYZPR
  • Package: 6-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 685
  • Description: P-Channel 0.5mm PMIC TPS22922 6 Pin 1V 6-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mounting Type Surface Mount
Package / Case 6-XFBGA, DSBGA
Surface Mount YES
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Type General Purpose
Resistance 116mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Max Power Dissipation 645mW
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1V
Terminal Pitch 0.5mm
Base Part Number TPS22922
Pin Count 6
Number of Outputs 1
Output Type P-Channel
Operating Supply Voltage 3.6V
Supply Voltage-Min (Vsup) 0.9V
Number of Channels 1
Interface On/Off
Nominal Supply Current 120nA
Output Configuration High Side
Power Dissipation 645mW
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Quiescent Current 200nA
Input Type Non-Inverting
Turn On Delay Time 799 μs
Switch Type General Purpose
Min Input Voltage 900mV
Max Input Voltage 3.6V
Supply Current-Max (Isup) 0.09mA
Nominal Input Voltage 3.6V
Turn-Off Delay Time 807 μs
Ratio - Input:Output 1:1
Voltage - Load 0.9V~3.6V
Rds On (Typ) 14m Ω
Height 500μm
Length 1.5mm
Width 900μm
Thickness 2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22922BYZPR Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).The 6-XFBGA, DSBGA package includes it.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be achieved by this LED driver.Currently, the LED driving board is equipped with Load Discharge, Slew Rate Controlled features.It comes under the family of TPS22922.It has a total of 6 terminations.For operation, 6 pins are used.There are 1 functions of the LED driver.With a supply voltage of 1V, high efficiency is possible.The LED driver has a total of 6 pins.It has a resistance of 116mOhm.It is set to 2A in this case.In order to operate normally, the supply voltage (Vsup) must be maintained above 0.9V.There are a total of 1 channels available.In order to maximize efficiency, the supply voltage should be set to 3.6V.Its maximum input voltage is 3.6V volts.The input voltage minimum is 900mV volts.A maximum supply current of 0.09mA is available for operation.This electrical component has a classification of General Purpose.

TPS22922BYZPR Features


Supplied from 1V
Resistance of 116mOhm
1 channels

TPS22922BYZPR Applications


There are a lot of Texas Instruments TPS22922BYZPR Power Switches ICs applications.

  • USB Ports/Hubs
  • Portable Video Game Players
  • Hot-Swap Systems
  • Notebook and Tablet Computers
  • Mobile Communication Devices
  • USB Power Distribution
  • Wearable Devices
  • Hard Disk Drives
  • Storage (HDDs, SSDs)
  • Solid-State Drives

Write a review

Note: HTML is not translated!
    Bad           Good