TPS22922YFPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 45mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 645mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.4mm |
| Base Part Number | TPS22922 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Min (Vsup) | 0.9V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 120nA |
| Output Configuration | High Side |
| Power Dissipation | 645mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 200nA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 45 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 900mV |
| Max Input Voltage | 3.6V |
| Supply Current-Max (Isup) | 0.00088mA |
| Turn-Off Delay Time | 139 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.9V~3.6V |
| Rds On (Typ) | 14m Ω |
| Height | 500μm |
| Length | 1mm |
| Width | 1.4mm |
| Thickness | 500μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22922YFPR Overview
It is packaged in the form of a Tape & Reel (TR).In the 6-XFBGA, DSBGA package, it is included.This lighting drivere has a mounting type of Surface Mount.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts has been specified.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.It belongs to the TPS22922 family.The termination count is 6.For operation, 6 pins are used.It contains 1 functions.The maximum output current is reduced to 2A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 1V.This LED driver is equipped with a total of 6 pins.It has 45mOhm resistance.The output current is set to 2A in this case.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 0.9V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.Optimal efficiency requires a voltage of 3.6V.A maximum input voltage of 3.6V volts can be applied to it.It has a 900mV volt minimum input voltage.In order to operate at its maximum capacity, the supply current must not exceed 0.00088mA.
TPS22922YFPR Features
Supplied from 1V
Resistance of 45mOhm
1 channels
TPS22922YFPR Applications
There are a lot of Texas Instruments TPS22922YFPR Power Switches ICs applications.
- Smartphone and PDA
- Portable Video Game Players
- Set-Top Boxes
- Wearable Devices
- USB Ports/Hubs
- Wireless Modem Data Cards
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- USB Power Distribution
- Handheld Devices
