Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
6-XFBGA, DSBGA |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e1 |
Feature |
Load Discharge, Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
116mOhm |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Max Power Dissipation |
645mW |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1V |
Terminal Pitch |
0.5mm |
Base Part Number |
TPS22922 |
Pin Count |
6 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
2A |
Operating Supply Voltage |
3.6V |
Supply Voltage-Min (Vsup) |
0.9V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
120nA |
Output Configuration |
High Side |
Power Dissipation |
645mW |
Output Current |
2A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Quiescent Current |
200nA |
Input Type |
Non-Inverting |
Turn On Delay Time |
188 μs |
Switch Type |
General Purpose |
Min Input Voltage |
900mV |
Max Input Voltage |
3.6V |
Supply Current-Max (Isup) |
0.00088mA |
Nominal Input Voltage |
3.6V |
Turn-Off Delay Time |
807 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
0.9V~3.6V |
Rds On (Typ) |
14m Ω |
Height |
500μm |
Length |
1.5mm |
Width |
900μm |
Thickness |
2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS22922YZPR Overview
The package is in the form of a Tape & Reel (TR).It is included in the package 6-XFBGA, DSBGA.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to -40°C~85°C TA.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.It comes under the family of TPS22922.It contains 6 terminations.In order to operate, the 6 pins are used.There are 1 functions of the LED driver.In order to meet the operation criteria, the maximum output current drops to 2A.As long as the supply voltage is 1V, high efficiency can be achieved.6 pins are equipped with it.116mOhm resistance is present in the lighting driver.It is set to 2A in this case.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 0.9V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.You can select from 1 channels.A supply voltage of 3.6V is recommended for maximum efficiency.Its maximum input voltage is 3.6V volts.There is a minimum input voltage of 900mV volts for this LED driver.It has a maximum supply current of 0.00088mA.
TPS22922YZPR Features
Supplied from 1V
Resistance of 116mOhm
1 channels
TPS22922YZPR Applications
There are a lot of Texas Instruments TPS22922YZPR Power Switches ICs applications.
- Hard Disk Drives
- Wireless Modem Data Cards
- Portable/Handheld Devices
- Wireless Headsets
- Hot-Swap Systems
- Storage Drives
- USB Protection
- Gaming
- Portable GPS
- Notebook and Tablet Computers