TPS22924BYZR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 810.63mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS22924 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Min (Vsup) | 0.75V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 810.63mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Quiescent Current | 75μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 750mV |
| Max Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.75V~3.6V |
| Rds On (Typ) | 18.3m Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22924BYZR Overview
The LED driver's packaged as a Cut Tape (CT).This package is included in 6-XFBGA, DSBGA.Surface Mount is the mounting type of the LED driver.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.There is a TPS22924 family of things that it belongs to.There are 6 terminations in it.The 6 pins are used to operate the LED driver.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2A.A supply voltage of 3.3V leads to high efficiency.Surface Mount is mounted in the way.6 pins are equipped with it.In this case, the output current is set to 2A.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 0.75V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.A supply voltage of 3.6V is recommended for maximum efficiency.This LED driving board can accept voltages up to 3.6V volts as an input.It has a 750mV volt minimum input voltage.
TPS22924BYZR Features
Supplied from 3.3V
1 channels
TPS22924BYZR Applications
There are a lot of Texas Instruments TPS22924BYZR Power Switches ICs applications.
- Mobile Communication Devices
- Solid State Drivers
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
- USB Power Distribution
- Hard Disk Drives
- Portable Video Game Players
- Portable Devices
- Storage Drives
- HDD and SSD
