TPS22924CYZPRB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 34.8mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 810.63mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22924 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 1 |
| Interface | On/Off |
| Output Configuration | High Side |
| Power Dissipation | 810.63mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 350μA |
| Quiescent Current | 75μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 800 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.75V~3.6V |
| Switching | BREAK-BEFORE-MAKE |
| Rds On (Typ) | 18.3m Ω |
| Height | 500μm |
| Length | 1.5mm |
| Width | 900μm |
| Thickness | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22924CYZPRB Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This package is included in 6-XFBGA, DSBGA.It has been mounted as Surface Mount on the LED driver.There is a switch type of General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.A lighting driver with Load Discharge, Slew Rate Controlled features is available.It comes under the family of TPS22924.It is necessary to use the 6 pins in order to operate the LED driver.Maximum output current falls to 2A when operation criteria are met.Surface Mount is mounted in the way.Currently, the LED driving board has a resistance of 34.8mOhm ohms.The output current is set to 2A in this case.There are a total of 1 channels available.In order to achieve the best efficiency, the supply voltage should be set to 3.6V.For its operation, a maximum current requirement of 350μA is required.A classification of General Purpose is assigned to this electrical component.
TPS22924CYZPRB Features
Resistance of 34.8mOhm
1 channels
TPS22924CYZPRB Applications
There are a lot of Texas Instruments TPS22924CYZPRB Power Switches ICs applications.
- USB Protection
- Portable Music Players
- Solid State Drivers
- Mobile Communication Devices
- USB Ports/Hubs
- Hot-Swap Systems
- Notebook PC
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- Portable Devices
