TPS22924CYZPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 14mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Power Rating | 810.63mW |
| Max Power Dissipation | 810.63mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22924 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Voltage | 3.6V |
| Interface | On/Off |
| Nominal Supply Current | 2μA |
| Current | 2A |
| Output Configuration | High Side |
| Power Dissipation | 810.63mW |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 75μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 840 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 750mV |
| Max Input Voltage | 3.6V |
| Nominal Input Voltage | 3.6V |
| Turn-Off Delay Time | 3 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.75V~3.6V |
| Rds On (Typ) | 18.3m Ω |
| Drain to Source Resistance | 5.7mOhm |
| Height | 500μm |
| Length | 1.5mm |
| Width | 900μm |
| Thickness | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22924CYZPT Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included in the package 6-XFBGA, DSBGA.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.Keeping the temperature at -40°C~85°C TA ensures reliable operation.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.It has a total of Load Discharge, Slew Rate Controlled features.It is a member of the TPS22924 family.The termination count is 6.For operation, 6 pins are used.It is important to note that the LED driving board has 1 functions.With a supply voltage of 1V, high efficiency is possible.The LED driver has a total of 6 pins.It has 14mOhm resistance.When this is the case, the output current is set to 2A.There are a total of 1 channels available.The maximum input voltage of the LED driver is 3.6V volts.There is a minimum input voltage of 750mV volts for this LED driver.In this case, the electrical component is classified as General Purpose.
TPS22924CYZPT Features
Supplied from 1V
Resistance of 14mOhm
1 channels
TPS22924CYZPT Applications
There are a lot of Texas Instruments TPS22924CYZPT Power Switches ICs applications.
- Wireless/Networking Cards
- Handheld Devices
- Portable GPS Device
- Portable/Handheld Devices
- Set-top-box
- USB Power Distribution
- Notebook and Tablet Computers
- USB Protection
- Telecom and Network Systems
- USB Ports/Hubs
