TPS22924DYZPR
| Parameters | |
|---|---|
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 18.3mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 810.63mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22924 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Min (Vsup) | 0.75V |
| Number of Channels | 1 |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Quiescent Current | 75μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7.4 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 2.5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.75V~3.6V |
| Rds On (Typ) | 18.3m Ω |
| Height | 500μm |
| Length | 1.5mm |
| Width | 900μm |
| Thickness | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
TPS22924DYZPR Overview
The package is in the form of a Tape & Reel (TR).Package 6-XFBGA, DSBGA contains it.This lighting drivere has a mounting type of Surface Mount.This switch is of type General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of N-Channel volts.This LED driving board is equipped with Load Discharge, Slew Rate Controlled features in order for it to be useful.The TPS22924 family consists of this type.In total, there are 6 terminations.6 pins are used for operation.The LED driver has 1 functions.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.The supply voltage of 3.3V is conducive to high efficiency.Surface Mount is mounted in the way of this lighting driver.It has a resistance of 18.3mOhm.This case has the output current set to 2A.The supply voltage (Vsup) should be kept above 0.75V for normal operation.There are a total of 1 channels to choose from.The supply voltage should be set at 3.6V for best efficiency.It operates at a maximum current of 350μA.This electrical component has a classification of General Purpose.
TPS22924DYZPR Features
Supplied from 3.3V
Resistance of 18.3mOhm
1 channels
TPS22924DYZPR Applications
There are a lot of Texas Instruments TPS22924DYZPR Power Switches ICs applications.
- Solid-State Drives
- PC Cards
- USB Power Distribution
- Wireless Headsets
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Telecom and Network Systems
- Wireless Modem Data Cards
- Hot-Swap Systems
- Portable GPS
