TPS22924DYZPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 18.3mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 810.63mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22924 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Min (Vsup) | 0.75V |
| Number of Channels | 1 |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 350μA |
| Adjustable Threshold | NO |
| Quiescent Current | 75μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7.4 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 2.5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.75V~3.6V |
| Rds On (Typ) | 18.3m Ω |
| Height | 500μm |
| Length | 1.5mm |
| Width | 900μm |
| Thickness | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22924DYZPT Overview
It is package in Tape & Reel (TR) case.In the 6-XFBGA, DSBGA package, it is included.The LED driver is mounted as Surface Mount.A General Purpose switch type is owned by it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Load Discharge, Slew Rate Controlled features is available.I believe it belongs to the TPS22924 family.It has a total of 6 terminations.The operation is performed through the 6 pins.As far as the lighting driver is concerned, there are 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2A.High efficiency is possible when the supply voltage is set to 3.3V.The LED driving board is mounted in the way of Surface Mount.The LED driver has 18.3mOhm resistance.The output current is set to 2A in this case.Normal operation requires a voltage above 0.75V for the supply voltage.The total number of channels is 1.When using this LED driving board, it is recommended that the supply voltage is set to 3.6V.For its operation, a current of 350μA is required.In the case of this electrical component, it is classified as General Purpose.
TPS22924DYZPT Features
Supplied from 3.3V
Resistance of 18.3mOhm
1 channels
TPS22924DYZPT Applications
There are a lot of Texas Instruments TPS22924DYZPT Power Switches ICs applications.
- PDAs
- Hot Swap
- Storage Drives
- Gaming
- Low Voltage I/O System Power
- Mobile Communication Devices
- HDD, SSD
- PC Card Hot Swap
- Handheld Devices
- Portable GPS
