TPS22925BYPHT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 13.1mOhm |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22925 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 3.6V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.65V~3.6V |
| Fault Protection | Reverse Current |
| Rds On (Typ) | 9.2m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SOURCE SINK |
| Height | 400μm |
| Length | 0m |
| Width | 0m |
| Thickness | 200μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22925BYPHT Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It's included in the 6-XFBGA, DSBGA package.Surface Mount is the mounting type of the LED driver.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~105°C TA.In this LED driver, there are no outputs available.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Load Discharge, Slew Rate Controlled features in order for it to be useful.It is part of the TPS22925 family of LED drivers.It contains 6 terminations.6 pins are used for operation.As far as functions are concerned, the lighting driver has 1.It is necessary to reduce the maximum output current to 3A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 1V.There is 13.1mOhm resistance on the LED driver.
TPS22925BYPHT Features
Supplied from 1V
Resistance of 13.1mOhm
TPS22925BYPHT Applications
There are a lot of Texas Instruments TPS22925BYPHT Power Switches ICs applications.
- Portable Music Players
- Wireless Modem Data Cards
- Smart Phones, Feature Phones
- Telecom and Network Systems
- Smartphone and PDA
- Notebook and Tablet Computers
- USB Protection
- Wearable Devices
- Low Voltage I/O System Power
- Solid-State Drives
