Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Load Discharge, Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
ECCN Code |
EAR99 |
Resistance |
129mOhm |
Max Power Dissipation |
463mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.95mm |
Base Part Number |
TPS22929 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
1.8A |
Operating Supply Voltage |
5.5V |
Interface |
On/Off |
Output Configuration |
High Side |
Power Dissipation |
463mW |
Output Current |
1.8A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Quiescent Current |
2μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
10.175 ms |
Switch Type |
General Purpose |
Min Input Voltage |
1.4V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
18.3 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.4V~5.5V |
Fault Protection |
Reverse Current, UVLO |
Rds On (Typ) |
115m Ω |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS22929DDBVR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included in the package SOT-23-6.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of P-Channel volts.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.It is a member of the TPS22929 family.It is necessary to use the 6 pins in order to operate the LED driver.The LED driver has 1 functions.The maximum output current must drop to 1.8A to meet the operation criteria.The LED driver has 129mOhm resistance.In this case, the output current is set to 1.8A.For maximum efficiency, the supply voltage should be set to 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.A minimum input voltage of 1.4V volts is required for this LED driver.
TPS22929DDBVR Features
Resistance of 129mOhm
TPS22929DDBVR Applications
There are a lot of Texas Instruments TPS22929DDBVR Power Switches ICs applications.
- Hot Swaps
- Solid State Drivers
- Mobile Communication Devices
- Smartphone and PDA
- Storage Drives
- HDD, SSD
- USB Ports/Hubs
- Wireless/Networking Cards
- Various applications equipped with buttons
- Portable Music Players