TPS22929DDBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Resistance | 129mOhm |
| Power Rating | 463mW |
| Max Power Dissipation | 463mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22929 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 1.8A |
| Output Configuration | High Side |
| Power Dissipation | 463mW |
| Output Current | 1.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1.8μA |
| Quiescent Current | 2μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.4V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.4V~5.5V |
| Fault Protection | Reverse Current, UVLO |
| Rds On (Typ) | 115m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22929DDBVT Overview
As a result, it is packaged in the form of a Tape & Reel (TR).In the SOT-23-6 package, it is included.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.It has a maximum output voltage of P-Channel volts.It has a total of Load Discharge, Slew Rate Controlled features.I believe it belongs to the TPS22929 family.It is necessary to use the 6 pins in order to operate the LED driver.It consists of 1 functions.It is positioned in the direction of Surface Mount.Lighting drivers with 129mOhm resistance are used.In this case, the output current is set to 1.8A.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.There is a minimum input voltage of 1.4V volts for this LED driver.A maximum current requirement of 1.8μA is required for its operation.
TPS22929DDBVT Features
Resistance of 129mOhm
TPS22929DDBVT Applications
There are a lot of Texas Instruments TPS22929DDBVT Power Switches ICs applications.
- Portable Music Players
- Handheld Devices
- Hard Disk Drives
- Hot Swaps
- Hot Swap
- Low Voltage I/O System Power
- Portable Devices
- Notebook and Tablet Computers
- Hot Swap
- Smartphone and PDA
