banner_page

TPS22930AYZVT

P-Channel 0.5mm PMIC TPS22930 4 Pin 4-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22930AYZVT
  • Package: 4-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 891
  • Description: P-Channel 0.5mm PMIC TPS22930 4 Pin 4-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-XFBGA, DSBGA
Number of Pins 4
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type General Purpose
Resistance 49mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position BOTTOM
Terminal Form BALL
Terminal Pitch 0.5mm
Base Part Number TPS22930
Number of Outputs 1
Output Type P-Channel
Number of Channels 1
Voltage 5.5V
Interface On/Off
Current -200mA
Output Configuration High Side
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Quiescent Current 2.1μA
Input Type Non-Inverting
Turn On Delay Time 7.4 μs
Switch Type General Purpose
Nominal Input Voltage 5.5V
Turn-Off Delay Time 9.5 μs
Ratio - Input:Output 1:1
Voltage - Load 1.4V~5.5V
Fault Protection Reverse Current, UVLO
Switching MAKE-BEFORE-BREAK
Rds On (Typ) 35m Ω
Height 500μm
Length 0m
Width 0m
Thickness 350μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22930AYZVT Overview


A Tape & Reel (TR) is used to package it.Package 4-XFBGA, DSBGA contains it.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type it owns.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.It has a maximum output voltage of P-Channel volts.It has a total of Slew Rate Controlled features.It belongs to the family TPS22930.In order to operate, 4 pins are used.It is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 49mOhm ohms.The output current is set to 2A in this case.In total, there are 1 channels available.Electrical components classified as General Purpose are included in this category.

TPS22930AYZVT Features


Resistance of 49mOhm
1 channels

TPS22930AYZVT Applications


There are a lot of Texas Instruments TPS22930AYZVT Power Switches ICs applications.

  • PC Cards
  • Portable Music Players
  • HDD and SSD
  • Wireless/Networking Cards
  • USB Power Distribution
  • Hard Disk Drives
  • Notebook and Tablet Computers
  • USB3.1 Power Delivery
  • Hot Swap
  • Hot-Swap Systems

Write a review

Note: HTML is not translated!
    Bad           Good