TPS22932BYFPR
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Min Input Voltage | 1.1V |
| Max Input Voltage | 3.6V |
| Supply Current-Max (Isup) | 0.09mA |
| Turn-Off Delay Time | 160 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.1V~3.6V |
| Rds On (Typ) | 55m Ω |
| Height | 500μm |
| Length | 1mm |
| Width | 1.4mm |
| Thickness | 500μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 115mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 800mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.4mm |
| Base Part Number | TPS22932 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Power Dissipation | 800mW |
| Output Current | 500mA |
| Adjustable Threshold | NO |
| Quiescent Current | 860nA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 450 μs |
TPS22932BYFPR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 6-XFBGA, DSBGA package as well.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There is a default setting of 1 for output.A maximum voltage of P-Channel volts is available from the output of this LED driver.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.It belongs to the TPS22932 family.As a result, there are 6 terminations.The 6 pins are used to operate the LED driver.It contains 1 functions.In order to meet the operation criteria, the maximum output current drops to 500mA.Supply voltages of 1.2V allow for high efficiency.There are 6 pins in total on this board.Lighting drivers with 115mOhm resistance are used.When this is the case, the output current is set to 500mA.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.Optimal efficiency requires a voltage of 3.6V.This LED driver can handle voltages up to 3.6V volts.As far as input voltage goes, it has a minimum of 1.1V volts.Its maximum supply current for operation is 0.09mA.
TPS22932BYFPR Features
Supplied from 1.2V
Resistance of 115mOhm
1 channels
TPS22932BYFPR Applications
There are a lot of Texas Instruments TPS22932BYFPR Power Switches ICs applications.
- Set-Top Boxes
- Various applications equipped with buttons
- Handheld Devices
- Low Voltage I/O System Power
- Wearable Devices
- USB3.1 Power Delivery
- Set-top-box
- PC Card Hot Swap
- Hot Swap
- Portable/Handheld Devices
