banner_page

TPS22932BYFPT

P-Channel 0.4mm PMIC TPS22932 6 Pin 1.2V 6-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22932BYFPT
  • Package: 6-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 104
  • Description: P-Channel 0.4mm PMIC TPS22932 6 Pin 1.2V 6-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Surface Mount
Package / Case 6-XFBGA, DSBGA
Surface Mount YES
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Termination SMD/SMT
ECCN Code EAR99
Type General Purpose
Resistance 90mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Max Power Dissipation 800mW
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.2V
Terminal Pitch 0.4mm
Base Part Number TPS22932
Pin Count 6
Number of Outputs 1
Output Type P-Channel
Operating Supply Voltage 3.6V
Number of Channels 1
Voltage 3.6V
Interface On/Off
Current 500mA
Output Configuration High Side
Power Dissipation 800mW
Output Current 500mA
Adjustable Threshold NO
Quiescent Current 860nA
Input Type Non-Inverting
Turn On Delay Time 450 μs
Switch Type General Purpose
Min Input Voltage 1.1V
Max Input Voltage 3.6V
Nominal Input Voltage 3.6V
Turn-Off Delay Time 160 μs
Ratio - Input:Output 1:1
Voltage - Load 1.1V~3.6V
Rds On (Typ) 55m Ω
Height 500μm
Length 1mm
Width 1.4mm
Thickness 500μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22932BYFPT Overview


Tape & Reel (TR) is the way it's packaged.This file is included in package 6-XFBGA, DSBGA.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.By default, it is set to output 1.It produces a maximum output voltage of P-Channel volts at its maximum output.As far as features are concerned, the LED driving board has Load Discharge, Slew Rate Controlled.It belongs to the family TPS22932.A total of 6 terminations have been found in it.6 pins are used for operation.It contains 1 functions.The supply voltage of 1.2V is conducive to high efficiency.There are 6 pins in total on this board.Currently, the LED driving board has a resistance of 90mOhm ohms.This case has the output current set to 500mA.We offer 1 channels in total.For maximum efficiency, the supply voltage should be set to 3.6V.A maximum input voltage of 3.6V volts can be applied to it.Input voltage must be at least 1.1V volts.For this electrical component, General Purpose is the classification.

TPS22932BYFPT Features


Supplied from 1.2V
Resistance of 90mOhm
1 channels

TPS22932BYFPT Applications


There are a lot of Texas Instruments TPS22932BYFPT Power Switches ICs applications.

  • Portable Devices
  • Set-Top Boxes
  • Wireless Modem Data Cards
  • Hot-Swap Systems
  • Smartphone and PDA
  • Solid State Drivers
  • USB Power Distribution
  • Portable GPS Device
  • USB Power Distribution
  • Mobile Communication Devices

Write a review

Note: HTML is not translated!
    Bad           Good