TPS22933ARSER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 6Ohm |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.5V~12V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22933 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Max Output Current | 50mA |
| Operating Supply Voltage | 12V |
| Number of Channels | 1 |
| Current - Output (Max) | 75mA |
| Output Current | 50mA |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Turn On Delay Time | 65 μs |
| Current - Supply | 2mA |
| Min Input Voltage | 2.5V |
| FET Type | P-Channel |
| Number of Inputs | 3 |
| Max Input Voltage | 12V |
| Turn-Off Delay Time | 32 μs |
| Ratio - Input:Output | 3:2 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 50mA |
| Delay Time - ON | 65μs |
| Height | 600μm |
| Length | 1.5mm |
| Width | 1.5mm |
| Thickness | 550μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22933ARSER Overview
A 8-UFQFN case is included. Parts should be packed in Tape & Reel (TR) cases. Part Surface Mount is mounted. There is a voltage of 2.5V~12V applied to it. It is essential that the minimal operating temperature of this component is not -40°C~85°C. Suitable for components connected in Handheld/Mobile Devices. There is a Source Selector Switch category assigned to the device. A P-Channel-type FET can be identified. There are 8 terminations available in the part. The device is designed with 8 pins. It is based on the TPS22933 component. This device is powered by 4.2V in order to deliver a high level of performance. This part's peak reflow temperature is utilized to run 260. As the part at 2mA is running on a supply current, this is needed to ensure that the part can continue to run. There is a part of the Power Management Circuits family that is used in this part. Among the pins on the part are 8 pins. A 2 output is available on the board. Chips can work when the output current carries under 75mA. This chip can be used with an input voltage of more than 12V volts without any problems. With an input voltage less than 2.5V V, the chip can be used. Delivery of the part is possible under 50mA output current. The component can be delivered a current of 50mA as an output. It is possible for this device to operate when the supply voltage is 12V. For this part to run, 3 inputs are required. 6Ohm should be used for determining the device resistance.
TPS22933ARSER Features
in a 8-UFQFN case
FET Type: P-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
2 outputs
operate supply voltage at 12V
3 inputs
TPS22933ARSER Applications
There are a lot of Texas Instruments TPS22933ARSER Ideal Diode controller applications.
- Power supply reverse polarity protection
- AC Rectifier
- USB HUBs
- PCs
- Factory automation and control - PLC digital output modules
- Automotive infotainment systems - head unit,telematics control unit
- Cell phones
- Active ORing for redundant power supplies
- Active ORing for redundant power
- Modems
