TPS22933ARSET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.5V~12V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.2V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22933 |
| Pin Count | 8 |
| Max Output Current | 50mA |
| Number of Channels | 1 |
| Operating Supply Current | 2mA |
| Current - Output (Max) | 75mA |
| Adjustable Threshold | NO |
| Turn On Delay Time | 65 μs |
| Min Input Voltage | 2.5V |
| FET Type | P-Channel |
| Number of Inputs | 3 |
| Max Input Voltage | 12V |
| Turn-Off Delay Time | 32 μs |
| Ratio - Input:Output | 3:2 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 50mA |
| Delay Time - ON | 65μs |
| Height | 600μm |
| Length | 1.5mm |
| Width | 1.5mm |
| Thickness | 550μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22933ARSET Overview
A 8-UFQFN case is included. It is suited to pack the part in Tape & Reel (TR) case. I would like to point out that the part is mounted in the way of Surface Mount. There is a voltage of 2.5V~12V applied to it. It is not allowed for this component to operate below -40°C~85°C degrees. Suitable for components connected in Handheld/Mobile Devices. The device is categorized as Source Selector Switch. It is possible to recognize the FET type as P-Channel. The part is available with 8 terminations. In this case, 8 pins have been used to design it. Using TPS22933 as a basis, the part is constructed. This device is powered by 4.2V in order to deliver a high level of performance. As part of the 260 process, the peak reflow temperature of this part is utilized. The part is from Power Management Circuits family. This part contains 8 pins that are located on the surface. In order for it to operate, a supply current of 2mA is used. Chips can work when the output current carries under 75mA. If the input voltage is greater than 12VV, this chip is capable of being used. There are certain situations in which the chip can be used with input voltages as low as 2.5V V. Deliveries can be made under 50mA output current. A 3 input is required to run the part.
TPS22933ARSET Features
in a 8-UFQFN case
FET Type: P-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
3 inputs
TPS22933ARSET Applications
There are a lot of Texas Instruments TPS22933ARSET Ideal Diode controller applications.
- Digital Cameras
- Industrial motor drives
- ADAS domain controller
- Cell phones
- Automotive USB hubs
- Asset tracker
- Electronic point of sale
- Modems
- Power supply reverse polarity protection
- Reverse Polarity Protection
