TPS22934YZVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 115mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 829.04mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22934 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 2.5μA |
| Output Configuration | High Side |
| Power Dissipation | 829.04mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20μA |
| Adjustable Threshold | NO |
| Quiescent Current | 3.5μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.5V |
| Max Input Voltage | 3.6V |
| Threshold Voltage | +1.6 2.7 |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~3.6V |
| Fault Protection | UVLO |
| Rds On (Typ) | 63m Ω |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 350μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22934YZVR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the 4-XFBGA, DSBGA package as well.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.Load Discharge, Slew Rate Controlled features are available on the lighting driver.I believe it belongs to the TPS22934 family.There are 4 terminations in it.4 pins are used for operation.As far as functions are concerned, the lighting driver has 1.With a supply voltage of 1.8V, high efficiency is possible.It is positioned in the direction of Surface Mount.4 pins are connected to it in total.In this LED driving board, there is 115mOhm resistance.When this is the case, the output current is set to 1A.The total number of channels is 1.In order to maximize efficiency, the supply voltage should be set at 3.6V.There is a maximum input voltage of 3.6V volts.The input voltage minimum is 1.5V volts.It requires a maximum current requirement of 20μA.Electrical components classified as General Purpose belong to this category.
TPS22934YZVR Features
Supplied from 1.8V
Resistance of 115mOhm
1 channels
TPS22934YZVR Applications
There are a lot of Texas Instruments TPS22934YZVR Power Switches ICs applications.
- HDD and SSD
- Wireless Modem Data Cards
- Gaming
- USB3.1 Power Delivery
- USB Power Distribution
- Mobile Communication Devices
- Wireless/Networking Cards
- Hot Swap
- Portable Video Game Players
- Portable Music Players
