TPS22934YZVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 63mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Power Rating | 829.04mW |
| Max Power Dissipation | 829.04mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22934 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 3.6V |
| Number of Channels | 1 |
| Voltage | 3.6V |
| Interface | On/Off |
| Nominal Supply Current | 2.5μA |
| Current | 1A |
| Output Configuration | High Side |
| Power Dissipation | 829.04mW |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Quiescent Current | 3.5μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 64 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.5V |
| Max Input Voltage | 3.6V |
| Nominal Input Voltage | 3.6V |
| Turn-Off Delay Time | 17 μs |
| Threshold Voltage | +1.6 2.7 |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~3.6V |
| Fault Protection | UVLO |
| Rds On (Typ) | 63m Ω |
| Drain to Source Resistance | 63mOhm |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 350μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22934YZVT Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).Package 4-XFBGA, DSBGA contains it.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of P-Channel volts.Features of the lighting driver are Load Discharge, Slew Rate Controlled.There is a TPS22934 family of things that it belongs to.There are 4 terminations in it.The 4 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 1.Using a voltage of 1.8V allows for high efficiency.Surface Mount is mounted in the way of this LED driving board.4 pins are connected to it in total.There is 63mOhm resistance on the LED driver.This case has the output current set to 1A.You can select from 1 channels.Optimal efficiency requires a voltage of 3.6V.This LED driving board can accept voltages up to 3.6V volts as an input.It has a 1.5V volt minimum input voltage.General Purpose?is?the?classification?for?this?electrical?component.
TPS22934YZVT Features
Supplied from 1.8V
Resistance of 63mOhm
1 channels
TPS22934YZVT Applications
There are a lot of Texas Instruments TPS22934YZVT Power Switches ICs applications.
- HDD and SSD
- PC Cards
- Hard Disk Drives
- Smartphone and PDA
- Mobile Communication Devices
- USB Power Distribution
- Portable Devices
- Set-top-box
- Solid State Drivers
- Telecom and Network Systems
