TPS22942DCKR
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.22mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS22942 |
| Pin Count | 5 |
| Output Type | P-Channel |
| Max Output Current | 100mA |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 80μA |
| Adjustable Threshold | NO |
| Quiescent Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.62V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~5.5V |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 400m Ω |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
TPS22942DCKR Overview
The package is in the form of a Tape & Reel (TR).It is included with the 5-TSSOP, SC-70-5, SOT-353 package as well.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of P-Channel volts.As far as features are concerned, the LED driving board has Auto Restart.There is a TPS22942 family of things that it belongs to.It has a total of 5 terminations.The 5 pins are used to operate the LED driver.As far as functions are concerned, the lighting driver has 1.In order to meet the operation criteria, the maximum output current drops to 100mA.High efficiency is possible at 1.8V supply voltage.This LED driver is equipped with a total of 5 pins.In this LED driving board, there is 500mOhm resistance.This case has the output current set to 200mA.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.A maximum input voltage of 5.5V volts can be applied to it.A voltage of 1.62V volts is the minimum input voltage.For its operation, a current of 80μA is required.It is equipped with 1 input.
TPS22942DCKR Features
Supplied from 1.8V
Resistance of 500mOhm
1 channels
TPS22942DCKR Applications
There are a lot of Texas Instruments TPS22942DCKR Power Switches ICs applications.
- Hard Disk Drives
- Solid-State Drives
- USB Protection
- Hot Swaps
- Handheld Devices
- Notebook PC
- Solid State Drivers
- PC Card Hot Swap
- Telecom and Network Systems
- Low Voltage I/O System Power
