TPS22942DCKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 400mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS22942 |
| Pin Count | 5 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 40μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.62V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~5.5V |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 400m Ω |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22942DCKRG4 Overview
A Tape & Reel (TR) is used to package it.There is a package for it in the 5-TSSOP, SC-70-5, SOT-353 package.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.A voltage of Not Required is used to power it.A maximum voltage of P-Channel volts is available from the output of this LED driver.Features of the lighting driver are Auto Restart.It is a member of the TPS22942 family.As a result, there are 5 terminations.For operation, we use the 5 pins.It consists of 1 functions.High efficiency is possible when the supply voltage is set to 1.8V.5 pins are equipped with it.400mOhm is the resistance of the lighting driver.It is set to 100mA in this case.To choose from, there are 1 channels.It is recommended to set the supply voltage to 5.5V for optimum efficiency.Input voltage is limited to 5.5V volts.A minimum input voltage of 1.62V volts is required for this LED driver.It has a maximum current requirement of 40μA.It has 1 inputs.The electrical component has the classification General Purpose.
TPS22942DCKRG4 Features
Supplied from 1.8V
Resistance of 400mOhm
1 channels
TPS22942DCKRG4 Applications
There are a lot of Texas Instruments TPS22942DCKRG4 Power Switches ICs applications.
- Solid-State Drives
- Gaming
- USB3.1 Power Delivery
- Hot Swap
- Smart Phones, Feature Phones
- HDD, SSD
- Set-Top Boxes
- USB Power Distribution
- Wearable Devices
- Notebook and Tablet Computers
