TPS22943DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 1.2Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 122mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS22943 |
| Pin Count | 5 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Current | 20mA |
| Output Configuration | High Side |
| Output Current | 80mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 40μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 60 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.62V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~5.5V |
| Min Current Limit | 40mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 400m Ω |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22943DCKR Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the 5-TSSOP, SC-70-5, SOT-353 package.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The LED driving board operates at Not Required volts.A maximum output voltage of P-Channel volts can be obtained with this LED driver.It belongs to the TPS22943 family.As a result, there are 5 terminations.During operation, the 5 pins are used.The LED driver has 1 functions.Using a voltage of 1.8V allows for high efficiency.As a result, it has a total of 5 pins.1.2Ohm is the resistance of the lighting driver.The output current is set to 80mA in this case.In total, 1 channels are available.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.The maximum input voltage of the LED driver is 5.5V volts.The minimum input voltage is 1.62V volts.There is a maximum current requirement of 40μA for its operation.It has 1 inputs.Electrical components classified as General Purpose belong to this category.
TPS22943DCKR Features
Supplied from 1.8V
Resistance of 1.2Ohm
1 channels
TPS22943DCKR Applications
There are a lot of Texas Instruments TPS22943DCKR Power Switches ICs applications.
- USB3.1 Power Delivery
- Wireless Headsets
- Storage (HDDs, SSDs)
- Hot Swaps
- Wearable Devices
- Portable Video Game Players
- Various applications equipped with buttons
- Wireless Modem Data Cards
- Notebook PC
- PC Cards
