TPS22945DCKRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 400mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS22945 |
| Pin Count | 5 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Quiescent Current | 40μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.62V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~5.5V |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 400m Ω |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22945DCKRG4 Overview
The package is in the form of a Tape & Reel (TR).It's included in the 5-TSSOP, SC-70-5, SOT-353 package.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Auto Restart features in order for it to be useful.This object belongs to the TPS22945 family.It has a total of 5 terminations.The 5 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.The supply voltage can be 1.8V for high efficiency.As a result, it has a total of 5 pins.400mOhm resistance is present in the lighting driver.When this is the case, the output current is set to 100mA.You can select from 1 channels.It is recommended to set the supply voltage to 5.5V for optimum efficiency.Voltage input is limited to 5.5V volts.There is a minimum input voltage of 1.62V volts.40μA is the maximum current required to operate it.1 inputs are provided.A classification of General Purpose is assigned to this electrical component.
TPS22945DCKRG4 Features
Supplied from 1.8V
Resistance of 400mOhm
1 channels
TPS22945DCKRG4 Applications
There are a lot of Texas Instruments TPS22945DCKRG4 Power Switches ICs applications.
- Wireless/Networking Cards
- PC Card Hot Swap
- Hot-Swap Systems
- Hot Swap
- USB3.1 Power Delivery
- Hard Disk Drives
- PDAs
- Solid State Drivers
- Various applications equipped with buttons
- USB Ports/Hubs
