TPS22948DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS22948 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 1 |
| Output Type | N/P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Current - Output (Max) | 130mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current |
| Output Peak Current Limit-Nom | 0.24A |
| Rds On (Typ) | 300m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SOURCE |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
TPS22948DCKR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 6-TSSOP, SC-88, SOT-363 package.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TA.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of N/P-Channel volts at its maximum output.Auto Restart features are available on the lighting driver.I believe it belongs to the TPS22948 family.A total of 6 terminations have been recorded.Currently, there are 1 functions associated with the lighting driver.Its maximum output voltage is 130mAV.Vsup (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.5V.This LED driving board has an interface that has the type BUFFER OR INVERTER BASED PERIPHERAL DRIVER.
TPS22948DCKR Features
TPS22948DCKR Applications
There are a lot of Texas Instruments TPS22948DCKR Power Switches ICs applications.
- Portable Devices
- PC Card Hot Swap
- Smartphone and PDA
- Storage Drives
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- Hot-Swap Systems
