TPS22949ADRGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Load Discharge |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 300mOhm |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1.525W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22949 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Operating Supply Voltage | 4.5V |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Power Dissipation | 1.52W |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Adjustable Threshold | NO |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 95 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.62V |
| Number of Inputs | 1 |
| Max Input Voltage | 4.5V |
| Nominal Input Voltage | 4.5V |
| Turn-Off Delay Time | 2 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~4.5V |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 400m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 730μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22949ADRGR Overview
It is packaged in the form of a Tape & Reel (TR).It's included in the 8-WFDFN Exposed Pad package.The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.Keeping the temperature at -40°C~105°C TJ ensures reliable operation.There are 2 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.Voltage output is P-Channel volts at maximum.A lighting driver with Auto Restart, Load Discharge features is available.There is a TPS22949 family of things that it belongs to.The termination count is 8.8 pins are used for operation.Currently, the lighting driver has a total of 1 functions.Using a voltage of 1.8V allows for high efficiency.A total of 8 pins are included in this LED driver.300mOhm is the resistance of the lighting driver.Self-contained LED driver with Power Management Circuits capacity in an econtainer.A total of 1 channels are available for you to choose from.It has a power supply of 3.3V.In order to maximize efficiency, the supply voltage should be set to 4.5V.As far as input voltage goes, its maximum is 4.5V volts.As far as input voltage goes, it has a minimum of 1.62V volts.It has a maximum current requirement of 85μA.A total of 1 inputs are available.Electrical components classified as General Purpose belong to this category.
TPS22949ADRGR Features
Supplied from 1.8V
Resistance of 300mOhm
1 channels
TPS22949ADRGR Applications
There are a lot of Texas Instruments TPS22949ADRGR Power Switches ICs applications.
- Hot Swap
- Various applications equipped with buttons
- Hard Disk Drives
- Telecom and Network Systems
- Solid State Drivers
- USB3.1 Power Delivery
- PDAs
- Set-Top Boxes
- Wireless/Networking Cards
- Hot-Swap Systems
