TPS22949AYZPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Auto Restart, Load Discharge |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 300mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22949 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Operating Supply Voltage | 4.5V |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Interface | On/Off |
| Nominal Supply Current | 85μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 85μA |
| Adjustable Threshold | NO |
| Quiescent Current | 85μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 1.62V |
| Number of Inputs | 1 |
| Max Input Voltage | 4.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.62V~4.5V |
| Min Current Limit | 100mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 300m Ω |
| Height | 500μm |
| Length | 1.25mm |
| Width | 2.25mm |
| Thickness | 310μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22949AYZPR Overview
Tape & Reel (TR) is the way it's packaged.The 8-XFBGA, DSBGA package includes it.Surface Mount is the mounting type of the LED driver.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~105°C TJ for reliable operation.The LED driver is equipped with 2 outputs.A voltage of Not Required is used to power it.Voltage output is P-Channel volts at maximum.It has a total of Auto Restart, Load Discharge features.I believe it belongs to the TPS22949 family.In total, there are 8 terminations.8 pins are used for operation.There are 1 functions of the LED driver.It is possible to obtain high efficiency with a supply voltage of 1.8V.There are 8 pins in total on this board.Lighting drivers with 300mOhm resistance are used.The LED driver is packaged in an econtainer with a capacity of Power Management Circuits.We offer 1 channels in total.The power supply of the part is 3.3V.In order to optimize the efficiency of the supply voltage, it should be set to 4.5V.This LED driver can handle voltages up to 4.5V volts.It has a 1.62V volt minimum input voltage.There is a maximum current requirement of 85μA for its operation.We have available 1 inputs.In the case of this electrical component, it is classified as General Purpose.
TPS22949AYZPR Features
Supplied from 1.8V
Resistance of 300mOhm
1 channels
TPS22949AYZPR Applications
There are a lot of Texas Instruments TPS22949AYZPR Power Switches ICs applications.
- Smartphone and PDA
- Set-Top Boxes
- Solid-State Drives
- HDD, SSD
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Set-top-box
- Portable Devices
- Hot-Swap Systems
- PC Cards
