TPS22951YFPR
| Parameters | |
|---|---|
| Height | 500μm |
| Length | 1mm |
| Width | 1.4mm |
| Thickness | 500μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Resistance | 1Ohm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 810mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | TPS22951 |
| Pin Count | 6 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.3V |
| Supply Voltage-Min (Vsup) | 2.2V |
| Number of Channels | 1 |
| Current - Output (Max) | 300mA |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Output Current | 600mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Adjustable Threshold | NO |
| Quiescent Current | 100μA |
| Switch Type | General Purpose |
| Min Input Voltage | 2.8V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.3V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.2V~5.3V |
| Min Current Limit | 600mA |
| Fault Protection | Current Limiting (Fixed) |
| Rds On (Typ) | 1 Ω (Max) |
TPS22951YFPR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).In the 6-XFBGA, DSBGA package, it is included.The mounting type of the LED driver is Surface Mount.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~85°C TJ to ensure reliable functioning.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It belongs to the family TPS22951.In total, there are 6 terminations.For operation, 6 pins are used.Currently, there are 1 functions associated with the lighting driver.This LED driver has a maximum output of 300mAV.The supply voltage can be 2.8V for high efficiency.6 pins are equipped with it.There is 1Ohm resistance on the LED driver.When this case is used, the output current is set to 600mA.A normal operation requires that the supply voltage (Vsup) remain above 2.2V.We currently have 1 channels available.A supply voltage of 5.3V is recommended for maximum efficiency.The maximum input voltage is 5.3V volts.The input voltage minimum is 2.8V volts.For its operation, a current of 100μA is required.1 inputs are available.For this electrical component, General Purpose is the classification.
TPS22951YFPR Features
Supplied from 2.8V
Resistance of 1Ohm
1 channels
TPS22951YFPR Applications
There are a lot of Texas Instruments TPS22951YFPR Power Switches ICs applications.
- Hot Swap
- PDAs
- Portable Video Game Players
- Mobile Communication Devices
- HDD and SSD
- Hard Disk Drives
- Storage Drives
- Hot Swaps
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
