TPS22953DQCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Power Good, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22953 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.5V~5.7V |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 14m Ω |
| Built-in Protections | TRANSIENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height | 800μm |
| Length | 2mm |
| Width | 3mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22953DQCR Overview
Tape & Reel (TR) is how it's packaged.Package 10-WFDFN Exposed Pad contains it.The lighting driver is mounted in the Surface Mount position.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~105°C TA.The lighting driver is equipped with 1 outputs that can be used.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.It is equipped with Auto Restart, Power Good, Slew Rate Controlled features.It belongs to the family TPS22953.A total of 10 terminations can be found in it.The 10 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.It is necessary to reduce the maximum output current to 5A to meet the operation criteria.The supply voltage of 3.3V is conducive to high efficiency.It is self-contained in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 5.7V.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.5V.This part has a power supply of 2.5/5V volts.
TPS22953DQCR Features
Supplied from 3.3V
TPS22953DQCR Applications
There are a lot of Texas Instruments TPS22953DQCR Power Switches ICs applications.
- PDAs
- Handheld Devices
- Wireless Headsets
- PC Card Hot Swap
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Notebook PC
- Portable Video Game Players
- HDD and SSD
- Portable GPS
