banner_page

TPS22963CYZPR

N-Channel 0.5mm PMIC TPS22963 6 Pin 6-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22963CYZPR
  • Package: 6-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 519
  • Description: N-Channel 0.5mm PMIC TPS22963 6 Pin 6-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-XFBGA, DSBGA
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Resistance 18mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position BOTTOM
Terminal Form BALL
Number of Functions 1
Terminal Pitch 0.5mm
Base Part Number TPS22963
Number of Outputs 1
Output Type N-Channel
Interface On/Off
Output Configuration High Side
Output Current 3A
Voltage - Supply (Vcc/Vdd) Not Required
Quiescent Current 38μA
Input Type Non-Inverting
Turn On Delay Time 928 μs
Switch Type General Purpose
Turn-Off Delay Time 2.5 μs
Ratio - Input:Output 1:1
Voltage - Load 1V~5.5V
Fault Protection Reverse Current
Rds On (Typ) 13.3m Ω
Built-in Protections TRANSIENT
Height 500μm
Length 1.5mm
Width 900μm
Thickness 2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22963CYZPR Overview


It is package in Tape & Reel (TR) case.There is a 6-XFBGA, DSBGA package that includes it.It has been mounted as Surface Mount on the LED driver.A General Purpose switch type is owned by it.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of Not Required.The maximum output voltage is N-Channel volts.The lighting driver has Slew Rate Controlled features.There is a TPS22963 family of things that it belongs to.In total, there are 6 terminations.The 6 pins are used to operate the LED driver.It has 1 functions.It is positioned in the direction of Surface Mount.In this LED driving board, there is 18mOhm resistance.This case has the output current set to 3A.

TPS22963CYZPR Features


Resistance of 18mOhm

TPS22963CYZPR Applications


There are a lot of Texas Instruments TPS22963CYZPR Power Switches ICs applications.

  • PDAs
  • Portable GPS
  • Wearable Devices
  • Notebook and Tablet Computers
  • Smart Phones, Feature Phones
  • Storage Drives
  • Portable/Handheld Devices
  • Notebook PC
  • Set-Top Boxes
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good