Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-XFBGA, DSBGA |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e1 |
Feature |
Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
18mOhm |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Number of Functions |
1 |
Terminal Pitch |
0.5mm |
Base Part Number |
TPS22963 |
Number of Outputs |
1 |
Output Voltage |
5.5V |
Output Type |
N-Channel |
Max Output Current |
3A |
Interface |
On/Off |
Output Configuration |
High Side |
Output Current |
3A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Quiescent Current |
38μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
928 μs |
Switch Type |
General Purpose |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
3.5 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1V~5.5V |
Fault Protection |
Reverse Current |
Rds On (Typ) |
13.3m Ω |
Max Junction Temperature (Tj) |
125°C |
Built-in Protections |
TRANSIENT |
Ambient Temperature Range High |
85°C |
Height |
500μm |
Length |
1.5mm |
Width |
900μm |
Thickness |
2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS22963CYZPT Overview
A Tape & Reel (TR) is used to package it.This package is included in 6-XFBGA, DSBGA.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Slew Rate Controlled.As you can see, it comes from the TPS22963 family.It contains 6 terminations.It is necessary to use the 6 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.The maximum output current must drop to 3A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.18mOhm is the resistance of the lighting driver.The output current is set to 3A in this case.
TPS22963CYZPT Features
Resistance of 18mOhm
TPS22963CYZPT Applications
There are a lot of Texas Instruments TPS22963CYZPT Power Switches ICs applications.
- Mobile Communication Devices
- Solid-State Drives
- HDD and SSD
- Hot-Swap Systems
- Notebook PC
- Portable/Handheld Devices
- Set-top-box
- Wireless/Networking Cards
- Hot Swaps
- Notebook and Tablet Computers