banner_page

TPS22964CYZPT

N-Channel 0.5mm PMIC TPS22964 6 Pin 6-XFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22964CYZPT
  • Package: 6-XFBGA, DSBGA
  • Datasheet: -
  • Stock: 720
  • Description: N-Channel 0.5mm PMIC TPS22964 6 Pin 6-XFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-XFBGA, DSBGA
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e1
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
Resistance 60mOhm
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Terminal Position BOTTOM
Terminal Form BALL
Number of Functions 1
Terminal Pitch 0.5mm
Base Part Number TPS22964
Number of Outputs 1
Output Type N-Channel
Max Output Current 3A
Operating Supply Voltage 5.5V
Interface On/Off
Output Configuration High Side
Output Current 3A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 96μA
Quiescent Current 38μA
Input Type Non-Inverting
Turn On Delay Time 928 μs
Switch Type General Purpose
Min Input Voltage 1V
Max Input Voltage 5.5V
Turn-Off Delay Time 2.5 μs
Ratio - Input:Output 1:1
Voltage - Load 1V~5.5V
Fault Protection Reverse Current
Rds On (Typ) 13.3m Ω
Max Junction Temperature (Tj) 125°C
Built-in Protections TRANSIENT
Ambient Temperature Range High 85°C
Height 500μm
Length 1.5mm
Width 900μm
Thickness 2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22964CYZPT Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 6-XFBGA, DSBGA.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.It belongs to the TPS22964 family.A total of 6 terminations have been recorded.In order to operate, 6 pins are used.The LED driving board has a total of 1 functions.As a result, the maximum output current is reduced to 3A in order to meet the operation requirements.Surface Mount is mounted in the way of this LED driving board.60mOhm resistance is present in the lighting driver.When this is the case, the output current is set to 3A.The supply voltage should be set at 5.5V for best efficiency.Input voltage is limited to 5.5V volts.As a minimum input voltage, it requires 1V volts.This system has a maximum current requirement of 96μA.

TPS22964CYZPT Features


Resistance of 60mOhm

TPS22964CYZPT Applications


There are a lot of Texas Instruments TPS22964CYZPT Power Switches ICs applications.

  • Hot Swap
  • Notebook PC
  • Set-top-box
  • Hot-Swap Systems
  • Portable Devices
  • USB Ports/Hubs
  • Wireless Modem Data Cards
  • Smartphone and PDA
  • USB Power Distribution
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good