banner_page

TPS22967DSGR

N-Channel 0.5mm PMIC TPS22967 8 Pin 5V 8-WFDFN Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22967DSGR
  • Package: 8-WFDFN Exposed Pad
  • Datasheet: -
  • Stock: 406
  • Description: N-Channel 0.5mm PMIC TPS22967 8 Pin 5V 8-WFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Terminal Pitch 0.5mm
Base Part Number TPS22967
Number of Outputs 1
Output Type N-Channel
Max Output Current 4A
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Interface On/Off
Output Configuration High Side
Output Current 4A
Voltage - Supply (Vcc/Vdd) 0.8V~5.5V
Adjustable Threshold NO
Quiescent Current 50μA
Input Type Non-Inverting
Turn On Delay Time 2.2 ms
Switch Type General Purpose
Supply Current-Max (Isup) 0.075mA
Turn-Off Delay Time 80 μs
Ratio - Input:Output 1:1
Voltage - Load 2.5V~5.5V
Rds On (Typ) 22m Ω
Height 800μm
Length 2mm
Width 2mm
Thickness 750μm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-WFDFN Exposed Pad
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 8
ECCN Code EAR99
Type General Purpose
Resistance 35mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V

TPS22967DSGR Overview


It is packaged in the form of a Tape & Reel (TR).The 8-WFDFN Exposed Pad package includes it.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.Operation is based on 0.8V~5.5V supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Features of the lighting driver are Load Discharge, Slew Rate Controlled.The TPS22967 family consists of this type.A total of 8 terminations can be found in it.It is necessary to use the 8 pins in order to operate the LED driver.It is important to note that the LED driving board has 1 functions.This operation requires the maximum output current to be decreased to 4A.The supply voltage can be 5V for high efficiency.Surface Mount is mounted in the way of this lighting driver.Currently, the LED driving board has 35mOhm resistance.When this case is used, the output current is set to 4A.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 2.5V.A total of 1 channels are available for you to choose from.It operates at a maximum supply current of 0.075mA.There is a classification for this electrical component of General Purpose.

TPS22967DSGR Features


Supplied from 5V
Resistance of 35mOhm
1 channels

TPS22967DSGR Applications


There are a lot of Texas Instruments TPS22967DSGR Power Switches ICs applications.

  • Hot Swaps
  • Telecom and Network Systems
  • Hot Swap
  • Handheld Devices
  • Smartphone and PDA
  • USB Power Distribution
  • Hot Swap
  • USB3.1 Power Delivery
  • Wireless Headsets
  • Hard Disk Drives

Write a review

Note: HTML is not translated!
    Bad           Good