Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-WFDFN Exposed Pad |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Load Discharge, Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
35mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
TPS22967 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
4A |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
2.5V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Output Configuration |
High Side |
Output Current |
4A |
Voltage - Supply (Vcc/Vdd) |
0.8V~5.5V |
Adjustable Threshold |
NO |
Quiescent Current |
50μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
2.2 ms |
Switch Type |
General Purpose |
Supply Current-Max (Isup) |
0.075mA |
Turn-Off Delay Time |
80 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~5.5V |
Rds On (Typ) |
22m Ω |
Height |
800μm |
Length |
2mm |
Width |
2mm |
Thickness |
750μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS22967DSGT Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the 8-WFDFN Exposed Pad package.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.In order to operate, it requires a voltage supply of 0.8V~5.5V.It has a maximum output voltage of N-Channel volts.Load Discharge, Slew Rate Controlled features are available on the lighting driver.I believe it belongs to the TPS22967 family.The termination count is 8.The 8 pins are used to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.Maximum output current falls to 4A when operation criteria are met.As long as the supply voltage is 5V, high efficiency can be achieved.The lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 35mOhm ohms.This results in a 4A output current.The maximum supply voltage is set to 5.5V.For normal operation, the supply voltage (Vsup) must be kept above 2.5V.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We currently have 1 channels available.For operation, it can supply a maximum current of 0.075mA.
TPS22967DSGT Features
Supplied from 5V
Resistance of 35mOhm
1 channels
TPS22967DSGT Applications
There are a lot of Texas Instruments TPS22967DSGT Power Switches ICs applications.
- Set-Top Boxes
- Notebook PC
- Hot Swap
- PC Cards
- Portable Music Players
- USB3.1 Power Delivery
- USB Ports/Hubs
- Portable GPS Device
- Wireless Headsets
- Low Voltage I/O System Power