Parameters |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Resistance |
27mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
TPS22968 |
Number of Outputs |
2 |
Output Type |
N-Channel |
Max Output Current |
4A |
Supply Voltage-Max (Vsup) |
5.5V |
Number of Channels |
2 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
4mA |
Output Configuration |
High Side |
Output Current |
4A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Quiescent Current |
55μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
1.128 ms |
Switch Type |
General Purpose |
Supply Current-Max (Isup) |
0.075mA |
Turn-Off Delay Time |
5 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
0.8V~5.5V |
Rds On (Typ) |
27m Ω |
Height |
800μm |
Length |
3mm |
Width |
2mm |
Thickness |
750μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-PowerWFDFN |
Number of Pins |
14 |
Operating Temperature |
-40°C~105°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Load Discharge, Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
TPS22968DPUR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included with the 14-PowerWFDFN package as well.This lighting drivere has a mounting type of Surface Mount.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~105°C TA.The LED driver has 2 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.There is a TPS22968 family of things that it belongs to.The termination count is 14.During operation, the 14 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 4A.Supply voltages of 5V allow for high efficiency.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 27mOhm resistance.When this is the case, the output current is set to 4A.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.We offer 2 channels in total.Operation requires 0.075mA supply current.
TPS22968DPUR Features
Supplied from 5V
Resistance of 27mOhm
2 channels
TPS22968DPUR Applications
There are a lot of Texas Instruments TPS22968DPUR Power Switches ICs applications.
- Wireless Headsets
- USB Protection
- Portable GPS
- USB Power Distribution
- Storage Drives
- Notebook PC
- Solid State Drivers
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Smart Phones, Feature Phones