Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-PowerWDFN |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Load Discharge, Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
4.4mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
TPS22969 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
2.5V |
Interface |
On/Off |
Output Configuration |
High Side |
Output Current |
6A |
Voltage - Supply (Vcc/Vdd) |
0.8V~5.5V |
Quiescent Current |
20.4μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
2.397 ms |
Switch Type |
General Purpose |
Turn-Off Delay Time |
4 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~5.5V |
Driver Number of Bits |
1 |
Rds On (Typ) |
4.4m Ω |
Supply Voltage1-Nom |
1.05V |
Built-in Protections |
TRANSIENT |
Supply Voltage1-Max |
5.5V |
Height |
800μm |
Length |
3mm |
Width |
3mm |
Thickness |
700μm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS22969DNYT Overview
It is package in Tape & Reel (TR) case.The 8-PowerWDFN package includes it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.With a supply voltage of 0.8V~5.5V, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Load Discharge, Slew Rate Controlled features.It belongs to the family TPS22969.The termination count is 8.For operation, we use the 8 pins.The LED driver has 1 functions.Using a voltage of 5V allows for high efficiency.It is positioned in the direction of Surface Mount.There is 4.4mOhm resistance on the LED driver.This results in a 6A output current.The Vsup value (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must remain above 2.5V.
TPS22969DNYT Features
Supplied from 5V
Resistance of 4.4mOhm
TPS22969DNYT Applications
There are a lot of Texas Instruments TPS22969DNYT Power Switches ICs applications.
- Hot-Swap Systems
- Wearable Devices
- Portable GPS Device
- Notebook PC
- Hot Swap
- HDD, SSD
- USB Protection
- USB Power Distribution
- Portable/Handheld Devices
- Portable Devices