TPS22975NDSGT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Resistance | 16mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22975 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 0.6V |
| Interface | On/Off |
| Current - Output (Max) | 6A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.7V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.7V |
| Fault Protection | Over Temperature |
| Rds On (Typ) | 16m Ω |
| Built-in Protections | THERMAL |
| Output Current Flow Direction | SINK |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22975NDSGT Overview
It is package in Tape & Reel (TR) case.The 8-WFDFN Exposed Pad package contains it.The lighting driver has the mounting type Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable operation, the temperature should be set to -40°C~105°C TA.The LED driver is equipped with 1 outputs.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled.It is a member of the TPS22975 family.It has a total of 8 terminations.The 8 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.From the lighting driver, there is a maximum output of 6AV.High efficiency is possible at 5V supply voltage.16mOhm resistance is present in the lighting driver.In order to operate normally, the supply voltage (Vsup) must be maintained above 0.6V.
TPS22975NDSGT Features
Supplied from 5V
Resistance of 16mOhm
TPS22975NDSGT Applications
There are a lot of Texas Instruments TPS22975NDSGT Power Switches ICs applications.
- Wearable Devices
- Portable/Handheld Devices
- Portable Video Game Players
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- PC Card Hot Swap
- HDD, SSD
- Set-top-box
- Solid State Drivers
