banner_page

TPS22980RGPR

0.5mm Gold PMIC TPS22980 20 Pin 3.3V 20-VFQFN Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS22980RGPR
  • Package: 20-VFQFN Exposed Pad
  • Datasheet: -
  • Stock: 454
  • Description: 0.5mm Gold PMIC TPS22980 20 Pin 3.3V 20-VFQFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 20-VFQFN Exposed Pad
Surface Mount YES
Number of Pins 20
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 20
ECCN Code EAR99
Resistance 250mOhm
Subcategory Power Management Circuits
Terminal Position QUAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Base Part Number TPS22980
Number of Outputs 1
Max Output Current 1.5A
Operating Supply Voltage 19.8V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Current - Output (Max) 500mA
Output Configuration High Side
Output Current 1.5A
Max Supply Current 200μA
Adjustable Threshold YES
Switch Type General Purpose
Min Input Voltage 4.5V
Number of Inputs 2
Max Input Voltage 19.8V
Ratio - Input:Output 1:1
Voltage - Load 3V~19.8V
Fault Protection Current Limiting (Adjustable), Over Temperature, Reverse Current
Current - Output 2 1.5A
Height 1mm
Length 4mm
Width 4mm
Thickness 930μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS22980RGPR Overview


It is package in Cut Tape (CT) case.This file is included in package 20-VFQFN Exposed Pad.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.By default, it is set to output 1.It comes under the family of TPS22980.It has a total of 20 terminations.The 20 pins are used for the operation of the system.It consists of 1 functions.500mAV is the maximum output of the LED driver.In order to meet the operation criteria, the maximum output current drops to 1.5A.With a supply voltage of 3.3V, high efficiency is possible.250mOhm resistance is present in the lighting driver.This results in a 1.5A output current.There is a Power Management Circuits capacity container for this LED driver that is self-contained.The maximum supply voltage is set to 3.6V.The supply voltage (Vsup) should be kept above 3V for normal operation.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We offer 1 channels in total.In order to maximize efficiency, the supply voltage should be set at 19.8V.Its maximum input voltage is 19.8V volts.As far as input voltage goes, it has a minimum of 4.5V volts.There is a maximum current requirement of 200μA for its operation.There are 2 inputs available.

TPS22980RGPR Features


Supplied from 3.3V
Resistance of 250mOhm
1 channels

TPS22980RGPR Applications


There are a lot of Texas Instruments TPS22980RGPR Power Switches ICs applications.

  • Hot Swap
  • Set-Top Boxes
  • Wireless Modem Data Cards
  • Hot Swaps
  • Portable Devices
  • Hot Swap
  • USB Ports/Hubs
  • USB Power Distribution
  • PC Card Hot Swap
  • Smart Phones, Feature Phones

Write a review

Note: HTML is not translated!
    Bad           Good