TPS2300IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~13V 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Depth | 4.5mm |
| Base Part Number | TPS2300 |
| Pin Count | 20 |
| Output Voltage | 21V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Nominal Supply Current | 200μA |
| Power Dissipation | 1.015W |
| Adjustable Threshold | YES |
| Current - Supply | 5μA |
| Output Current-Max | 500A |
| Supply Current-Max (Isup) | 1mA |
| Nominal Input Voltage | 13V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Fault Timeout, Slew Rate |
| Feature Pins | DISCH1, DISCH2, /ENABLE, /FAULT, ISET1, ISET2, PWRGD1, PWRGD2, TIMER, VREG |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2300IPW Overview
In the 20-TSSOP (0.173, 4.40mm Width) package you will find it.At present, 2 channels are available.The package resembles a Tube.This device has a total of 20 terminations.Device DUAL is located at the terminal position.In total, there are 20 pins on it.With a supply voltage of 4.5V, high efficiency is possible.The way it's set up is the way Surface Mount wants it.The electrical component in question falls into the classification Hot Swap Controller.The temperature should be set to -40°C~85°C to ensure reliable functioning.There are General Purpose applications available for the device.Hot-swappable device is featured in Latched Fault, UVLO.Hot-swappable device should be able to work wHot-swappable deviceh a power source of 3V~13V 3V~5.5VV.Hot-swappable device belongs to the TPS2300 family of numbers.20 pins are used in operation.In Power Management Circuits, this gadget is self-contained.Among its programmable features are Circuit Breaker, Fault Timeout, Slew Rate.5μA is currently in short supply.Surface Mount is its direction of movement.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 3V so that the device can function normally.The maximum supply current it requires to operate is 1mA.There is no problem with a 21V output voltage if you want high efficiency.
TPS2300IPW Features
The terminal position of 20
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V
TPS2300IPW Applications
There are a lot of Texas Instruments TPS2300IPW hot swap controllers applications.
- Data communication systems
- PC board hot swap insertion and removal
- Industrial
- Current monitoring
- Overvoltage protection
- Firewire
- Switch
- Distributed power systems
- Power monitoring
- Current limit and current foldback limit functions
